Make the ultimate statement with our new range of removable, reusable I Heart Wall Art Easy Wallpaper.
This pretty design features a native Australian flower watercolour illustration in shades of pink and purple.
I Heart Wall Art Easy Wallpaper is printed on a premium quality, 'peel and stick' paper designed for purpose. It is removable and re-positionable.
All our wallpaper is shipped in 95cm drops, at a range of heights.
To work out your sizing, please measure the width of your space and the height.
For example, for a wall that is 3.3 metres wide and 3.3 metres high, purchase 380cm (4 drops) width and 350cm height.
The pattern repeats every one metre.
We strongly recommend purchasing a sample piece to try. Use Sample-30cm for the width and Sample - 20cm to get the option of a sample for $15.
For custom sizes, please contact our team for a quote at firstname.lastname@example.org.
I Heart Wall Art wallpaper is:
- Safe to use
- Easy to apply
- Won’t shrink, rip or wrinkle
- Polyester fabric
- Installation Instructions Included
- Removable easy hang self- adhesive
- Matte Finish
- Easy to remove without causing wall damage in most cases. (We cannot guarantee that no damage to paint will occur, as it depends on the prep work done when the wall was painted -
How to apply I Heart Wall Art wallpaper
There's no need for equipment or for hiring a professional! Follow our tips and tricks to get your walls looking amazing in no time.
Preparing your walls
> If your wall has recently been painted it is important to allow 3 days when applying I Heart Wall Art wallpaper as bubbles and failure for the adhesive to stick can occur if the paint is still outgassing.
> Walls must be smooth as the easy hang self -adhesive will not adhere to textured surfaces eg brick wall or rough concrete.
> Fill any holes and remove any hooks, give the wall a wipe down with a damp cloth to remove any dust particles as they can cause air bubbles.
> You will need a ladder, a sharp Stanley knife, measuring tape, a cloth and in some cases a trusty assistant.
To apply your wallpaper:
> To begin application, just peel the backing paper by 20cm and crease paper.
> Align the first panel at your desired starting point – the first panel is the most important panel, you must line it up correctly as if it is not square with the wall it will affect lining up any subsequent panels. Starting from the far left hand side of your wall, moving left to right , top to bottom.
> Start carefully peeling back the backing paper around 30 cm at a time
> Press down on the panel applying pressure from the middle to the outside edges using firm pressure , this method works best.
> It is ok to peel the panel back to release any bubbles
> Your wallpaper can be repositioned several times although it may become less effective in adhering to your surface if too much dust, dirt or fibres become collected on the surface.
> Bubbles can be easily removed by light rubbing and light pressure or in some cases piercing the bubble with a pin then smoothing it out in a circular motion with a clean cloth.
> Finally use a sharp blade to trim any excess from the base and sides of the wall, make sure you use a new blade.